Special Polymer

Products

Menu
  • Epoxy Paint
  • Polyurethane Paint
  • Special Polymer
  • Elastomeric Coatings
  • Heat Resistant (HR) Paint
  • Thermosetting Acrylic (TSA)
  • Zinc Rich Coatings
  • Chlorinated Rubber (CR) Paint

The finest specialist for your all coating needs

Scroll to Top

GP Stove Coat 334

  • Alkyd Melamine amino stoving topcoat
  • Solid by volume 35%
  • Application by Conventional spray, Electrostatic or HVLP spray
  • Recommended DFT 30 -40 micron
  • Recommended for Auto Component, Bus body

Torc

  • Single pack phenolic alky based topcoat
  • Solid by Volume 35%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Confirms to the requirement of Transformer Oil resistance coating as per BIS 14947

Vinyl Top Coat

  • Single pack Vinyl topcoat
  • Solid by Volume 32%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 50 micron over primer
  • Recommended for Project Process, Oil Gas, Infrastructure Construction

GP Bond 951 PU IMC Coating

  • Two component Aliphatic Polyurethane based In mold coating
  • Solid by Volume 20%
  • Application by spray
  • Recommended DFT 15 -18 micron

GP Trucoat 331

  • Single pack air drying topcoat
  • Solid by Volume 35%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Trucoat 333

  • Single pack air drying topcoat
  • Solid by Volume 35%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Trucoat 336

  • Single pack quick drying topcoat
  • Solid by Volume 35%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Trucoat 339

  • Single pack quick drying topcoat
  • Solid by Volume 35%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Synthetic Topcoat

  • Single pack quick drying topcoat
  • Solid by Volume 35%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Rustcoat 502

  • Single Pack Air drying primer cum rust convertor
  • Solid by Volume 35%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3 or Pretreated surface

GP Rustcoat 503

  • Two Pack Polyurethane based primer cum rust convertor
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3 or Pretreated surface

GP Rustcoat 505

  • Single Pack Air drying primer cum rust convertor
  • Solid by Volume 35%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 microns over St2, St3 or Pretreated surface
  • Recommended for Motors, Castings, Construction Infrastructure

GP Truprime 301

  • Single Pack Air drying Primer
  • Solid by Volume 35%
  • Application by Conventional and HVLP spray gun
  • Recommended DFT 30 -35 micron over St2, St3 pretreated surface
  • Recommended for general industrial applications

Special Polymer 304 Primer

  • Alkyd amino Stoving primer
  • Solid by Volume 35%
  • Application by Conventional, HVLP or Electrostatic spray gun
  • Recommended DFT 25 – 35 microns over St2, St3 or Pretreated surface
  • Recommended for general industrial applications like steel furniture

Special Polymer 306 Primer

  • Single Pack Air drying acrylate alkyd Primer
  • Solid by Volume 35%
  • Application by Conventional and HVLP spray gun
  • Recommended DFT 30 -35 microns over St2, St3 or Pretreated surface
  • Recommended for general industrial applications like steel furniture

Special Polymer Sealcast Primer

  • Single Pack Air drying acrylate alkyd Primer
  • Solid by Volume 35%
  • Application by Conventional and HVLP spray gun
  • Recommended DFT 30 -35 microns over St2, St3 or Pretreated surface
  • Recommended for general industrial applications like steel furniture

Special Polymer TORC Primer

  • Single Pack Phenolic alkyd based Oil resistance primer
  • Solid by Volume 40%
  • Application by brush, Conventional and HVLP spray gun
  • Recommended DFT 30 – 35 micron over St2, St3 or blast cleaned surface

Special Polymer Vinyl Primer

  • Single Pack modified Vinyl based primer
  • Solid by Volume 32%
  • Application by Conventional, HVLP or Airless gun
  • Recommended DFT 65- 85 micron over St2, St3 or blast cleaned surface

GP TORC Intermediate MIO

  • Single pack Phenolic alkyd based MIO intermediate
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP gun
  • Recommended DFT 30 – 40 micron over primer

GP Vinyl HB Intermediate

  • Single pack modified Vinyl based intermediate
  • Solid by Volume 32%
  • Application by Conventional, HVLP and Airless spray gun
  • Recommended DFT 65 – 85 micron over primer